Die Height Indicator

Price on Request: Get Latest Price

Applicable to more than 300T press, as the adjustment slider, closed height control, and other special machines, two-way stroke control number. Display number control range 0-999mm, display numerical accuracy of 0.01mm., the number reached the predetermined upper and lower limit, that is, the speed ratio can be two choices, the input shaft every turn a week.

Price on Request: Get Latest Price

The electronic display device is controlled by a smart chip, and the digital tube display can be set to apply to more models.

• High-precision: 5-digit digital display, the data can be accurate to two decimal places, the display overflow is automatically adjusted.
• Digital clarity: the 3-digit digital tube displays the upper and lower limit values ¿¿¿¿¿¿at a glance.
• Wide pitch range: 0-99mm pitch, the direction of rotation can be selected.
• Memory data when power off: not afraid of data loss.
• Overflow alarm: the data overflows the upper and lower limits, the 3-digit digital tube flashes, if the display range overflows, an error is displayed

 

Price on Request: Get Latest Price

It is mainly suitable for various high-performance presses, punches, shears, bending machines and other special machine tools. It is used as an adjustment slider to close the height and has a bidirectional limit function. The main supporting products are the updated products of mechanical display devices, which have a high technological content.

Mainly applicable to a variety of high performance machine, punching machine, shearing machine, bending machine and other special machine tools and other equipment, as the adjustment slider closed high, with two-way limiting function, which is a modern cutting, folding, punching , pressing machine supporting the main products, is a significant number of machinery for updating product, with the content of science and technology high.

Price on Request: Get Latest Price

The utility model is suitable for a press under 300T, which is used as an adjusting slide block, a closed height number display control, and a stroke adjustment control.

When the number reaches the predetermined upper and lower limit, the electrical signal is issued, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position

Price on Request: Get Latest Price

This section is of the same size as XSQ-1. It is specially used for shearing machine, bending machine, stopping gear, adjusting stroke setting. It can also be used in other special machine tools to adjust the stroke accurately. The utility model is suitable for two kinds of screw 10mm pitch and 6mm pitch, and is provided with a flexible shaft joint. The utility model has the advantages of convenient use, beautiful machine tool, etc

Price on Request: Get Latest Price

The utility model is suitable for a press under 300T, which is used as an adjusting slide block, a closed height number display control, and a stroke adjustment control. The bidirectional control range is 0 to 999mm. When the number reaches the predetermined upper and lower limit, the electrical signal is issued, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position.

Price on Request: Get Latest Price

The electronic display device is controlled by a smart chip, and the digital tube display can be set to apply to more models.

• High-precision: 5-digit digital display, the data can be up to two decimal places, the display overflow is automatically adjusted.
• Digital clarity: the 3-digit digital tube displays the upper and lower limit values ??????at a glance.
• Wide pitch range: 0-99mm pitch, the direction of rotation can be selected.
• Memory data when power off: not afraid of data loss.
• Overflow alarm: the data overflows the upper and lower limits, the 3-digit digital tube flashes, if the display range overflows, an error is displayed

Approx. 8,500 / No Get Latest Price

Our reputed entity is engaged in supplying Die Height Indicator

Price on Request: Get Latest Price

It is suitable for adjusting the stroke of shearing machine and bending machine. There are two kinds of directions.

Applicable to shearing machine, bending machine, adjusting the travel direction, there are about two kinds.

Price on Request: Get Latest Price

Applicable to more than 300T press, as the adjustment slider, closed height control, and other special machines, two-way stroke control number. Display number control range 0-999mm, display numerical accuracy of 0.01mm., the number reached the predetermined upper and lower limit, that is, the speed ratio can be two choices, the input shaft every turn a week.

Approx. 8,500 / Unit Get Latest Price

Features:

• It is the first applied the touch pad with the upgraded the product’s design .
• It improved the noise protection and vibrate proof for the stabilization of the product.
• The Electronic Counter shows the clear vision by FND display
• It provides more comfort working environment, especially it is useful for the dark working place or night work.
• The rotation direction can be selected.
• It indicate the 1/10 decimal point, that useful for the mold setting.
• The product dimension is same with the analogue type adjuster counter. The voltage is AC/DC 24V.

Approx. 8,500 / Unit Get Latest Price

Features:

• It is the first applied the touch pad with the upgraded the product’s design .
• It improved the noise protection and vibrate proof for the stabilization of the product.
• The Electronic Counter shows the clear vision by FND display
• It provides more comfort working environment, especially it is useful for the dark working place or night work.
• The rotation direction can be selected.
• It indicate the 1/10 decimal point, that useful for the mold setting.
• The product dimension is same with the analogue type adjuster counter. The voltage is AC/DC 24V.

Approx. 12,000 / Piece Get Latest Price

Features:

• It is the first applied the touch pad with the upgraded the product’s design .
• It improved the noise protection and vibrate proof for the stabilization of the product.
• The Electronic Counter shows the clear vision by FND display
• It provides more comfort working environment, especially it is useful for the dark working place or night work.
• The rotation direction can be selected.
• It indicate the 1/10 decimal point, that useful for the mold setting.
• The product dimension is same with the analogue type adjuster counter. The voltage is AC/DC 24V.

Price on Request: Get Latest Price

Features:

• Real-time display of the back stop position at a glance
• Reasonable design of powerful technical support, resulting in high stability and high anti-interference ability of the system
• Real-time modification and storage of 10 programs, 1000 counts, easily meet your daily needs
• let a function of preventing back crashed workpiece at a shear gauge to improve the accuracy of long-term processing machine
• When the counting function may operate shearing machine according holder down, the real-time count
• at
• The circulation loop state, may be A program is positioned and counted. After completion, transfer to the next program to run back and forth.
• Single-step function In a single-step state, it can be positioned and counted in a program until all workpieces are stopped.
• The system has a built-in number limit function system. Adjust the front and back limit of the material blocking system to protect the material blocking and maintain long-term accuracy.
• Easy to learn and easy to operate

Price on Request: Get Latest Price

Price on Request: Get Latest Price

Used for 250T press below, suitable for machine tool slider can not open hole, protruding outside installation, as an adjustment slider, closed height control, shear, bending machine, other machine stroke adjustment control.  Show the number reached the predetermined lower limit, that is, the issue of electrical signals, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position.

Price on Request: Get Latest Price

The utility model is suitable for a press under 300T, which is used as an adjusting slide block, a closed height number display control, and a stroke adjustment control. The bidirectional control range is 0 to 999mm. When the number reaches the predetermined upper and lower limit, the electrical signal is issued, accurate, timely and reliable. Input shaft every turn a week, digital increase (minus) 0.1mm, ten automatic (retreat) position.

Price on Request: Get Latest Price

This section is of the same size as XSQ-1. It is specially used for shearing machine, bending machine, stopping gear, adjusting stroke setting. It can also be used in other special machine tools to adjust the stroke accurately. The utility model is suitable for two kinds of screw 10mm pitch and 6mm pitch, and is provided with a flexible shaft joint. The utility model has the advantages of convenient use, beautiful machine tool, etc..

Price on Request: Get Latest Price

Applicable to cutting machine, bending machine stroke, display and two-way control. Display range 0-999mm, input shaft every turn a week, digital delivery (minus) 0.1mm, every ten automatic enter (retreat) position.